Zima Lite stands out due to its completely cordless design, powerful brushless pump, dual suction inlets, and fine filters, which work together to provide optimal cleaning performance. It features intelligent mapping with a 2x ultrasonic radar navigation system and advanced algorithm that adapts to your pool for more effective cleaning sessions. It can not only clean the floors, but also climb walls and clean waterlines. Powered by a long-lasting 9,300mAh battery, it allows for up to 3 hours of continuous cleaning on a single charge.

While both Zima Pro and Zima Lite offer advanced cleaning capabilities, Zima Pro is equipped with a floating platform that allows for a real-time connection during cleaning and includes an additional "manual" mode for more customized control. On the other hand, Zima Lite is designed for complete cordless freedom, eliminating the need for an extension cord. This makes Zima Lite more lightweight and convenient for those seeking a simpler, yet powerful pool cleaning solution.

Zima Lite is designed to clean a variety of pool types, including in-ground and above-ground pools. It is suitable for different pool surfaces such as fiberglass, plaster, aggregate, tile, and other materials.

Zima Lite is equipped with a dual-layer filtration system can easily collect debris like rocks up to 1.2 inches, and particles down to 180µm (180 micron). It can effectively collect sand and fine dirt and prevent them from leaking back into the water

The duration can be up to 3 hours, depending on the actual situation.

Floor mode: 2~3 hours

Wall mode: 1~2 hours

Overall mode: 2~2.5 hours

In floor mode, Zima Lite may treat large slopes as walls and will not clean them. However, in overall mode, it is capable of climbing slopes and walls.

Zima Lite will park at the wall in the pool when it completes the cleaning cycle or when the battery level goes below 10%.

With our industry-first ultrasonic solution, Zima Lite delivers full coverage by cleaning in an N-shaped pattern with high efficiency. Users can enter their pool information in the app, and Zima Lite will automatically match a cleaning pattern

Yes, in both overall mode and wall & waterline mode, Zima Lite can climb and clean the pool walls.

Zima Lite uses an aviation waterproof plug for charging.

How will it hold up on salt water pools?

Suitable for 6*12m (20 * 40ft)

Zima Lite has a convenient cleaning history feature within its app, enabling users to review past cleaning sessions and any associated end reasons for abnormalities.

Search for "Degrii OS" on the Apple App Store or Google Play Store, download the app, and initiate the connection to unlock customized cleaning features.

To keep Zima Lite performing at its best, regular care includes cleaning the filter after each use, checking for and removing any debris that may be stuck in the brushes or suction system, and ensuring the battery is properly charged. Detailed maintenance instructions can be found in the user manual.

If not in use for an extended period, it is recommended to store the robot in a cool and dryenvironment, above 0°C, to help preserve the battery capacity. It is recommended to storethe robot with a full charge and recharge it every six months.

For first use, please soak the sponges on both sides of the scrubbing brush for at least 5 minute, or gently press the robot to assist it in sinking better into the water. After cleaning is complete, please wipe away any water from the charging contacts before charging.

Zima Lite takes approximately 3 to 4 hours to charge from a low battery to a full charge.

To connect the app to the pool robot, download "Degrii OS" from the Apple App Store or Google Play Store. Follow the in-app instructions to connect the device to your pool robot. Make sure your mobile device is connected to a 2.4 GHz network at the beginning of the setup process.

You can know when Zima Lite has completed its cleaning cycle when it parks at the wall in the pool. This can happen either when it finishes the cleaning cycle or when the battery level drops below 10%.

No, it is not safe to swim in the pool while the pool robot is operational.

Yes, it is recommended to clean the filter basket of the robot after each cleaning cycle.

The pool robot should be used and serviced by adults only.